Difference between revisions of "Clubs and Clinics Wizard"

From Charitylog Manual
Jump to: navigation, search
Line 32: Line 32:
 
==Wizard method 1: using the Wizard from the Club's Details screen==
 
==Wizard method 1: using the Wizard from the Club's Details screen==
  
On the Club/Clinic Details page for any club, there are two possible buttons which will run the Wizard. The first is found at the bottom of the Clinic Details screen, next to the "Save" buttons, and appears regardless of which tab you currently have open.
+
On the Club/Clinic Details page for any club, click the "Launch Wizard" button at the bottom of the Clinic Details screen, next to the "Save" buttons. This button appears regardless of which tab you currently have open.
  
 
[[File:CC_69.png|border]]
 
[[File:CC_69.png|border]]
Line 48: Line 48:
  
 
If the time that the occurrence starts has not yet passed, you will only be able to confirm attendances, and you will be able to send a text message (SMS) to clients for confirmation. If the start time has passed, you will not be able to send an SMS to clients, but you will be able to enter completed attendances.
 
If the time that the occurrence starts has not yet passed, you will only be able to confirm attendances, and you will be able to send a text message (SMS) to clients for confirmation. If the start time has passed, you will not be able to send an SMS to clients, but you will be able to enter completed attendances.
 +
 +
 +
===Launching the Wizard from an occurrence which has already been created===
  
  
Line 60: Line 63:
  
  
===What's the difference between the Wizard and doing it the normal way?===
+
===Adding attendees/members===
 +
 
 +
A feature of the Wizard is that you can add members/attendees at the point when you enter all the other attendances.
 +
 
 +
On any Wizard screen, click the "Add New Member" button in the top right hand corner, or the one above the "Save and Finish" button (both function the same way).
 +
 
 +
[[File:CCW_1.png|border]]
 +
 
 +
[[File:CCW_2.png|border]]
 +
 
 +
 
 +
 
 +
 
 +
 
 +
===Non-attendance issues===
  
 
As detailed in the [[Clubs And Clinics Module]] chapter, the "normal process" of running clubs is:
 
As detailed in the [[Clubs And Clinics Module]] chapter, the "normal process" of running clubs is:

Revision as of 15:45, 28 September 2015

Helpheader small.png

Location in standard build: Clubs and Clinics > Clubs/Clinics/Groups > click on club in question > click "Launch Wizard"

Or: Clubs and Clinics > Clubs/Clinics/Groups > click on club in question > click on "Future Meetings" > click "Launch Wizard"

Also available at: Clubs and Clinics > Clubs/Clinics/Groups > click "Use Wizard"

The Wizard is a streamlined interface for running Clubs. The Wizard can only be used for Clubs, where everyone attends at once; the Wizard is not suited to Clinics.



Why use the Wizard interface?

In some situations, the Wizard interface is quicker than using the full create/confirm/complete structure as described in the Clubs And Clinics Module section. This is usually why our customers use it. However, it's important to look at the pros and cons of using the Wizard when deciding if it will work for you or not.


Wizard: pros

  • The Wizard can speed up data entry, because using the Wizard does not require prior creation/confirmation of an occurrence of a Club - just enter the date and then enter the attendees.
  • The Wizard includes the ability to add people whose details are held on Charitylog to an occurrence without adding them as a member first (note that this will add them to the membership, it's just that the Wizard lets you do this without the person in question already being a member.


Wizard: cons

  • Because the Wizard does creation/confirmation/completion in one step, people are never "booked to attend" as such. This means the Wizard cannot measure non-attendance unless the data is entered very carefully by the user.
  • As a side-effect of the above, the Wizard is likely to add large numbers of meaningless non-attendances to reports about Club attendance.
  • Also, if the "save completed attendances into client history" option is being used, the Wizard may create Contacts in a client's History saying that they failed to attend a Club, even if in fact they were never booked to attend in the first place.


Wizard method 1: using the Wizard from the Club's Details screen

On the Club/Clinic Details page for any club, click the "Launch Wizard" button at the bottom of the Clinic Details screen, next to the "Save" buttons. This button appears regardless of which tab you currently have open.

File:CC 69.png


When you click this button you will be prompted to enter a date:

File:CC 70.png


This needs to be a date on which the club will run (that is, if the club is set to happen on Mondays, you will need to click a Monday). Once you have selected a date, you will be taken straight to the attendance entry screen for that days' occurrence.

File:CC 71.png


If the time that the occurrence starts has not yet passed, you will only be able to confirm attendances, and you will be able to send a text message (SMS) to clients for confirmation. If the start time has passed, you will not be able to send an SMS to clients, but you will be able to enter completed attendances.


Launching the Wizard from an occurrence which has already been created

The other button which can launch the Wizard is found on the "Future Meetings" tab - there is an option to "Goto Wizard" for each future occurrence - that is, on occurrences that have already been created.

File:CC 72.png


This will take you to the attendance entry screen again - there is no need to enter a date, as the Wizard has been launched from an occurrence which is already scheduled.

File:CC 71.png


Adding attendees/members

A feature of the Wizard is that you can add members/attendees at the point when you enter all the other attendances.

On any Wizard screen, click the "Add New Member" button in the top right hand corner, or the one above the "Save and Finish" button (both function the same way).

File:CCW 1.png

File:CCW 2.png



Non-attendance issues

As detailed in the Clubs And Clinics Module chapter, the "normal process" of running clubs is:

  1. Create the occurrence (tell the system that an occurrence will happen on a certain date)
  2. Confirm the attendance (tell the system who is to attend - this can be edited as much as you like before completion)
  3. Complete the occurrence (tell the system that the occurrence took place, and who attended)

The Wizard combines these steps together into one. This sometimes makes data entry quicker.

However, note that to report on numbers of non-attendance, and if you want to report on Non-Attendance Reasons, the system needs to have an idea of who was due to attend, but didn't. Using the three step (Create, Confirm, Complete) process, anyone who was Confirmed to attend but didn't can be counted as a non-attendance. However, the Wizard does not have a separate confirmation stage, so non-attendances cannot be accurately counted. The Wizard simply uses the full membership list as the list of possible attendees, so anybody who is on the membership but doesn't attend will be counted as a "non-attendance".

Obviously this effect is more pronounced if there is a big difference between the number of "members" (people who might attend) and attendees. If the club in question is a knitting group where the same 8 people are expected week in week out, and if one of them doesn't attend it would be noticed, the Wizard method will work - because the 8 members are the only people who would attend anyway. However, if the club is a youth club where you have 200 people on the membership list but only 30 show up every week, using the Wizard to enter these attendances will result in 170 "non-attendances" being added to reports every time, which is probably to be avoided.

  • If you don't count non-attendance, i.e. you aren't concerned with counting who said they wouldn't attend but then didn't, this won't be a problem, except that there may be a lot of non-attendances shown on the reports - but you can just ignore them.
  • If you do want to count non-attendances, it's probably better to use the Create-Confirm-Complete method.


Using the Wizard from the main list of Clubs

Clicking on the "Clubs/Clinics/Groups" menu item will display all the Clubs and Clinics that are currently active on your system.


File:CC 18.png


You will see the following button at the top of the screen:


File:CC 19.png


Clicking the "Use Wizard" button will start the process. You will see the following:


File:CC 20.png


You need to tell the system the date that you want to work with. Depending on the day of the week that you have picked, the system will return the possible clubs.


File:CC 21.png


Tick the boxes for any or all clubs that you want to work with, then you have the following options across the bottom:

"Print attendance sheets" will open the following pop-up. You can select any options you wish to display on the attendance sheets, and then print them.


File:CC 22.png


"Print Transport Lists" opens another pop-up, where you can decide what options to display on the list for the minibus driver, taxi driver etc.


File:CC 23.png


Finally, "Enter Attendances" will allow you to enter who attended the club.

  • If you're using the wizard before the club has occurred, you may want to stop once you've printed the transport lists and registers, and then come back once the club/clinic has happened.
  • Alternatively, you can continue, and record the members as "confirmed to attend". You can then send a text message to each client to remind them of their arranged attendance time.

The Wizard now displays a single entry screen for all the clubs/clinics you are working with. As well as being able to enter attendances for several clubs at once, this screen also has the advantage that you can easily add people to the membership of clubs at this point. For example, if you use the Wizard to record attendance at two clubs which follow one another - say a bowling club and then a lunch club - it is very easy to record the fact that someone from the bowling club decided to stay for the lunch club too. Simply put a tick in both columns.

An example Wizard entry screen is displayed below - click on the screenshot to enlarge.


790px


Once you have ticked the relevant boxes, click "Save and Finish".


Sending SMS to attendees (requires TextAnywhere)

or "Save and Send SMS For Confirmation". The latter button will take you to a screen where you can set up the SMS to be sent.


File:CC 25.png


  • If the client has a mobile number on their client record, this will be carried in.
  • If they have a landline, this can be carried in, but you must do it manually.
  • If they have no telephone number on their client record at all, a warning will be shown.


Adding members from the Wizard

The Clubs and Clinics module has a "Wizard" which is a quick way of entering data about an occurrence of a group. The Wizard also has a feature for adding new members which can be used to "batch add" members. Note that anyone who is to be added needs to be set up as a Client on Charitylog first.


EmbedVideo does not recognize the video service "youtubehd".


Click on Clubs and Clinics > Clubs/Clinics/Groups. This will display a list of all the clubs/clinics which are set up on your system. Click on the name of the club/clinic you wish to add members to.

File:CC 73.png


File:CC 74.png


At the bottom of the screen that appears, click "Launch Wizard".

File:CC 75.png


You will be prompted to enter a date for data entry. Ideally, use a date which has already happened, so that real data can be entered. If you do not have data but still want to add members all in one batch, pick a date several years in the past so that data entered here will not interfere with current reports.

File:CC 76.png


When the Wizard appears, click the "Add New Member" button as many times as you need slots to add people.

File:CC 77.png


Empty spaces will appear in the attendance list.

File:CC 78.png


Now type the surname of the client you wish to add to the membership. A lookup list will appear with matching clients on. Click on a client's name to select them.

File:CC 79.png


Fill in the "Attended" tick box for all the new members. Do not miss this step out! If you don't tick "attended" for everyone, anyone not ticked will not be added to the membership.

File:CC 80.png


Finally, click "Save and Finish" at the bottom of the screen.

File:CC 81.png


You can now click on the "Member Details" tab in the details of the club/clinic to make sure that the relevant people have been added to the membership, and edit their membership details if necessary.


Rob Kay - manual author (talk) 16:18, 25 September 2015 (BST)