Difference between revisions of "Referral Templates"

From Charitylog Manual
Jump to: navigation, search
(The Stages/Statuses)
 
(55 intermediate revisions by 5 users not shown)
Line 2: Line 2:
  
 
[[File:Menu_reftemplates.PNG]]
 
[[File:Menu_reftemplates.PNG]]
 
  
 
__TOC__
 
__TOC__
  
 +
=Introduction=
  
=Introduction=
+
Project templates are used when you wish to specify stages of a referral/case or a process to be followed (workflow).  They can be used to simplify caseloads for users, giving them prompts of what is needed to be done and what is due next.  Templates are also '''required''' if you are using the [[modules| Funded Work Module]].
  
Project templates are used when you wish to specify stages of a referral/case or a process to be followed (workflow).  They can be used to simplify caseloads for users giving them prompts of what is needed to be done and what is due next.  Templates are also '''required''' if you are using the [[modules| Funded Work Module]].
+
{{#ev:youtube|S-xQsyqFPRQ|790}}
  
 
Templates are split up into two main areas:
 
Templates are split up into two main areas:
Line 15: Line 15:
 
*The stages that apply to the template.
 
*The stages that apply to the template.
  
Templates can be used for a re range of different things see below for some examples:
+
Templates can be used for a range of different things see below for some examples
  
Application Process
+
Application Process:
Template Name: New Application
+
Template Name: New Application
Stages:
+
Stages:
Application Received - To be reviewed
+
*Application Received
Reviewed - To be interviewed
+
*Preparation Phase
Interviewed - Induction Required
+
*Appointed
Induction Complete
+
*Left - Resigned
 +
*Left - Redundancy
  
Service Provision with assessment
+
Referral process with assessment:
Template Name: Service Requested
+
Template Name: New Referral
Stages:
+
Stages:
Service Requested - Assessment Required
+
*Referral Received
Assessment Completed - Service to be provided
+
*Assessment
Service Provided - Review Required
+
*Active
Review Completed
+
*Closed - Complete
 +
*Closed - Client disengaged
  
Templates and statuses/stages can be reported on using the [[Progress Interval Report]] which reports on:
+
Templates and stages can be reported on using the [[Progress Interval Report]] which reports on:
*Interval - The time between stages.
+
*'''Interval''' - The time between stages.
*Currently on a stage - Number of referrals/case currently on that stage
+
*'''Currently on a stage''' - Number of referrals/case currently on that stage
*Went on a stage - Referrals place on that stage in the time period.
+
*'''Went on a stage''' - Referrals place on that stage in the time period.
*Who have been on a stage - The number of referrals that have been on this stage regardless of the date they went onto the stage.
+
*'''Who have been on a stage''' - The number of referrals that have been on this stage regardless of the date they went onto the stage.
*Not yet on a stage - The number of referrals/cases that have not been on this stage.
+
*'''Not yet on a stage''' - The number of referrals/cases that have not been on this stage.
*Raw Data - Exports the data to excel.
+
*'''Raw Data''' - Exports the data to excel.
  
 
=Setting Up Templates=
 
=Setting Up Templates=
  
Once the template has been added the stages/statutes can be created/edited. It is possible to use templates without stages however there is no reporting for this, only displayed on report data exported.
+
Once the template has been added the stages can be created/edited. Before setting up, consider if you are using templates to indicate actual tasks which are necessary, or to indicate the phase/stage the referral is in.  
  
 
==The Template Name and use==
 
==The Template Name and use==
Line 50: Line 52:
  
 
The template screen will display any current active templates, to view any inactive templates click on the 'Show Active/Inactive Templates' button.  The screen has columns showing details of any existing templates:
 
The template screen will display any current active templates, to view any inactive templates click on the 'Show Active/Inactive Templates' button.  The screen has columns showing details of any existing templates:
*Name - The specified template name.
+
*'''Name''' - The specified template name.
*Description - Administrator notes about the template.
+
*'''Description''' - Administrator notes about the template.
*Project - The project that the template is linked to.
+
*'''Stages''' - Displays the number of Stages set up on this template (includes inactive stages)
*Type - If the template is used on a standard project the type will not be specified.  If the project is connect to the [[Modules| Funded Work Module]] then the type will be displayed as 'Funded Work' See [[Project_Set_Up#General_tab|Project Set up]] for details on changing project types.
+
*'''Inactive Templates'''- Displays inactive templates that were previously used.
*Statuses - Displays the number of Stages (statuses) set up on this template (includes inactive stages)
 
*Template Active - Displayes if the template is active and can be used on referrals/cases.
 
  
  
To edit an existing template click on the templates name, templates and stages cannot be deleted as this will affect the data and reporting.  You can safely disable Templates and stages that are no longer required, these will still be displayed for existing entries.  To create a new template click on the 'Enter New Template' button.
+
To edit an existing template click on the template's name.  Templates and stages cannot be deleted as this will affect the data and reporting.  You can safely disable Templates and stages that are no longer required, these will still be displayed for existing entries.  To create a new template click on the 'Enter New Template' button.
  
 
You will be displayed the template details screen which will display the options to be completed/edited.  On existing templates you will be displayed other templates on the project as well as any stages already set up on this template(on the right hand side).
 
You will be displayed the template details screen which will display the options to be completed/edited.  On existing templates you will be displayed other templates on the project as well as any stages already set up on this template(on the right hand side).
Line 64: Line 64:
 
[[File:ProjTemp_new.png]]
 
[[File:ProjTemp_new.png]]
  
On a new template you can you the copy tool to copy the template settings from another template, select the existing template in the list and click copy.This will not copy over the statuses/stages (this is done on the set up of the first one.
+
On a new template you can use the copy tool to copy the template settings from another template, select the existing template in the list and click copy. This will not copy over the stages (this is done on the set up of the first one.
  
 
Complete/Edit the following:
 
Complete/Edit the following:
*Template Name - This is displayed on the project selection page as well as the referral edit screen and history tab of a record.
+
*'''Template Name''' - This is displayed on the project selection page as well as the referral edit screen and history tab of a record. This will also appear elsewhere in relevant reports.  
*Template Description - A description for the administrator only display on the previous screen.
+
*'''Template Description''' - A description for the administrator only display on the previous screen.
*Project - The project this template is attached to.
+
*'''[[Display Order| Order]]''' - The display order that the template will appear on the screen when used with other templates.
*[[Display Order| Order]] - The display order that the template will appear on the screen when used with other templates.
+
*'''Active?''' - Whether this template available for use or not
*Active? - Whether this template available for use or not
+
*'''Allow user to change default stage?''' - If a default stage is the first stage a template starts on.  This option specifies if a user is allowed to change the starting stage.
*Always force a stage to be entered? - When set to yes the template stages must be used on each contact of the referral/case.
+
*'''Default Stage when entering Extra Info on a Referral''' - This means when someone uses the Extra Info button on the referral, it will default to the required stage.
*Allow user to change default status? - If a default stage is the first stage a template starts on.  This option specifies if a user is allowed to change the starting stage/status.
+
*'''Use due stage on follow-up action on RaC page?''' - This is a useful feature that can auto populate the next stage that is required.
*Use due status on follow-up action on RaC page? - This is a useful feature that can auto populate the next stage/status that is required.
 
  
To save the template without creating/editing the stages simply click the 'Save and Close' button.  To save the template and create the stages/statuses click on the 'Save and Edit Progress Stage Workflows' button.
+
To save the template without creating/editing the stages simply click the 'Save and Close' button.  To save the template and create the stages, click on the 'Save and Edit Progress Stage Workflows' button.
  
==The Stages/Statuses==
+
==The Stages==
  
This page will display the current workflow stages/statuses that have been setup if the template was previously created and configured.  You will be displayed the following summary of the stages/statuses
+
This page will display the stages used by that template and will allow you to add new stages or re-order existing ones. Note that when you first create a Template it will provide you with a default stage called Case Note. You can use this as your first stage by just re-naming it and then adding others as required.
*Stage Name - The name displayed to the user for the stage/status.
 
*Stage Description - Notes for administrators on this page.
 
*Default - Specifies if this is the stage selected for new referrals/cases.
 
*Order -This is the order that this stage/status is in the workflow process.
 
*Active? - If this stage is currently in use.
 
*Contact Method - The method of contact used to complete the action using this stage.
 
*Details of Contact - The text entered in the details of contact by this stage.
 
*Done By - The user specified to do the recorded action.
 
*Further Action Needed - Details of the text used if the stage creates a further step/action.
 
*Response Method - The method to be used for the next step/action.
 
*When By- How long before the next step/action is due (based on the date entered).
 
*To Be Done By - Who is to do the specified step/action.
 
  
To edit an existing stage click on the name or to create a new one click on the 'Enter New Progress Stage/Workflow' button.  On the stage edit screen complete/edit the following:
+
The below screenshot shows the screen used to control how the stage is added and controlled:
 +
[[File:ProjTemplate_stage.png]]
  
[[File:ProjTemplate_stage.png]]
+
*'''Progress Stage Name''' - The name displayed to the user for the stage.
 +
*'''Description''' - Notes for administrators on this page.
 +
*'''Display Order''' -This is the order that this stageis in the workflow process.
 +
*'''Set as default Stage when creating a New Referral''' - This will be the first stage when creating a new referral
 +
*'''Allow users to change the stage on the New Referral''' - Set this to No if you want your users to have to progress through the stages rather than selecting one.
 +
*'''Set as default Stage when entering Extra Info on a Referral''' - When using Extra Info, this will default to the selected stage
 +
*'''Updates current Referral stage''' - if you are using stages to indicate tasks, rather than the stage of the referral, set this to No then it will not update the stage of the referral.
 +
*'''Referral Only: Referred by''' This can be used to default to a chosen referrer as that particular template is only used for that referrer.
 +
*'''Referral Reasons''' - will be present if they are activated for that project
 +
*'''Contact Method''' - The method of contact used to complete the action using this stage.
 +
*'''Details of Contact''' - The text entered in the details of contact by this stage.
 +
*'''Done By''' - The user specified to do the recorded action.
 +
 
 +
 
 +
'''If something needs to be done, you can fill in the ''Action details: outstanding action'' section'''
 +
 
 +
*'''User allowed to enter further actions?''' - You can set this to know, this will stop any further actions being created when using this stage.
 +
*'''Further Action Needed''' - Details of the text used if the stage creates a further step/action.
 +
*'''Priority rating''' - Specifies if a priority rating should be populated for the further action that is required.
 +
*'''Response Method''' - The method to be used for the next step/action.
 +
*'''Calculate follow-up date?''' - You can have the further action to be done by date to be calculated on the date of entry.
 +
*'''Date calculation period''' - Specifies how the follow up date is calculated.
 +
*'''No. of days until next action?''' - Specifies the number of days/working days to calculate.
 +
*'''Planned when-by time''' - Specifies a planned time for the further action.
 +
*'''To be done by''' - Specifies the user to complete the further action.
 +
 
 +
'''Please note that the fields above can be left blank for the user to complete when creating referrals/case or updating existing ones.'''
 +
 
 +
Click 'Save Details' to save your changes, you will be returned to the previous screen where you can add new stages.
 +
 
 +
==Referral Status==
 +
The [https://wiki.dizions.co.uk/index.php/Referral_status Referral Status] allows you to use multiple stages which can reflect the task, or progress of that referral, yet be collated into a single status.
 +
 
 +
 
 +
==Editing Stages==
  
'''Edit Details of Progress Stage/Workflow'''
+
Once the stages have been created you can re-order the stages without the need for changing the display order. Simply click on the icon on the left and drag the stage to its required order. Alternatively, you can sort A to Z using the icons at the top of the screen.  
*Progress stage name - The name displayed to the user for the stage/status.
 
*Description - Notes for administrators on this page.
 
*Display order - This is the order that this stage/status is in the workflow process.
 
*Set as default status - If this is going to be the first stage displayed on a new referral/case.
 
*Active - If this stage is currently in use.
 
'''Fill the details of the Contact below:
 
*Referral Only: Referred by - This will complete the referrer for a new referrer/case.
 
*Contact Method - The method of contact used to complete the action using this stage.
 
*Details of Contact - The text entered in the details of contact by this stage.
 
*Done By - The user specified to do the recorded action.
 
'''Time and Travel'''
 
*Default staff time - Completes the Staff time in the options box of the contact.
 
*Default travelling time - Completes the travelling time in the options box of the contact.
 
*Default travelling mileage - Completes the travelling mileage in the options box of the contact.
 
*Default transport method - Completes the transport method in the options box of the contact.
 
'''If something needs to be done, fill in the section below:'''
 
*User allowed to enter further actions? - You can set this to know, this will stop any further actions being created when using this stage.
 
*Further Action Needed - Details of the text used if the stage creates a further step/action.
 
*Next status/progress stage to be done - If you have specified that the template will Use due status on follow-up action on RaC page then you can select which stage is next, when pressing an update button for the referral/case the template will then use the specified stage.
 
*Priority rating - Specifies if a priority rating should be populated for the further action that is required.
 
*Response Method - The method to be used for the next step/action.
 
*Calculate follow-up date? - You can have the further action to be done by date to be calculated on the date of entry.
 
*Date calculation period - Specifies how the follow up date is calculated.
 
*No. of days until next action? - Specifies the number of days/working days to calculate.
 
*Planned when-by time - Specifies a planned time for the further action.
 
*To be done by - Specifies the user to complete the further action.
 
  
'''Please not that the fields above can be left blank for the user to complete when creating referrals/case or updating existing ones.'''
+
[[File:new.png]]
 +
----
  
Click 'Save Details' to save your changes, you will be returned to the previous screen where you can add new stages.  If you wish to specify the next stage/status you will need to update the previous stage, click on its name to edit it.
+
[[File:helpheader_small.png|right]]

Latest revision as of 10:49, 28 February 2024

Helpheader small.png

Menu reftemplates.PNG

Introduction

Project templates are used when you wish to specify stages of a referral/case or a process to be followed (workflow). They can be used to simplify caseloads for users, giving them prompts of what is needed to be done and what is due next. Templates are also required if you are using the Funded Work Module.

Templates are split up into two main areas:

  • The Template
  • The stages that apply to the template.

Templates can be used for a range of different things see below for some examples

Application Process: Template Name: New Application Stages:

  • Application Received
  • Preparation Phase
  • Appointed
  • Left - Resigned
  • Left - Redundancy

Referral process with assessment: Template Name: New Referral Stages:

  • Referral Received
  • Assessment
  • Active
  • Closed - Complete
  • Closed - Client disengaged

Templates and stages can be reported on using the Progress Interval Report which reports on:

  • Interval - The time between stages.
  • Currently on a stage - Number of referrals/case currently on that stage
  • Went on a stage - Referrals place on that stage in the time period.
  • Who have been on a stage - The number of referrals that have been on this stage regardless of the date they went onto the stage.
  • Not yet on a stage - The number of referrals/cases that have not been on this stage.
  • Raw Data - Exports the data to excel.

Setting Up Templates

Once the template has been added the stages can be created/edited. Before setting up, consider if you are using templates to indicate actual tasks which are necessary, or to indicate the phase/stage the referral is in.

The Template Name and use

ProjTemp Header.png

The template screen will display any current active templates, to view any inactive templates click on the 'Show Active/Inactive Templates' button. The screen has columns showing details of any existing templates:

  • Name - The specified template name.
  • Description - Administrator notes about the template.
  • Stages - Displays the number of Stages set up on this template (includes inactive stages)
  • Inactive Templates- Displays inactive templates that were previously used.


To edit an existing template click on the template's name. Templates and stages cannot be deleted as this will affect the data and reporting. You can safely disable Templates and stages that are no longer required, these will still be displayed for existing entries. To create a new template click on the 'Enter New Template' button.

You will be displayed the template details screen which will display the options to be completed/edited. On existing templates you will be displayed other templates on the project as well as any stages already set up on this template(on the right hand side).

ProjTemp new.png

On a new template you can use the copy tool to copy the template settings from another template, select the existing template in the list and click copy. This will not copy over the stages (this is done on the set up of the first one.

Complete/Edit the following:

  • Template Name - This is displayed on the project selection page as well as the referral edit screen and history tab of a record. This will also appear elsewhere in relevant reports.
  • Template Description - A description for the administrator only display on the previous screen.
  • Order - The display order that the template will appear on the screen when used with other templates.
  • Active? - Whether this template available for use or not
  • Allow user to change default stage? - If a default stage is the first stage a template starts on. This option specifies if a user is allowed to change the starting stage.
  • Default Stage when entering Extra Info on a Referral - This means when someone uses the Extra Info button on the referral, it will default to the required stage.
  • Use due stage on follow-up action on RaC page? - This is a useful feature that can auto populate the next stage that is required.

To save the template without creating/editing the stages simply click the 'Save and Close' button. To save the template and create the stages, click on the 'Save and Edit Progress Stage Workflows' button.

The Stages

This page will display the stages used by that template and will allow you to add new stages or re-order existing ones. Note that when you first create a Template it will provide you with a default stage called Case Note. You can use this as your first stage by just re-naming it and then adding others as required.

The below screenshot shows the screen used to control how the stage is added and controlled: ProjTemplate stage.png

  • Progress Stage Name - The name displayed to the user for the stage.
  • Description - Notes for administrators on this page.
  • Display Order -This is the order that this stageis in the workflow process.
  • Set as default Stage when creating a New Referral - This will be the first stage when creating a new referral
  • Allow users to change the stage on the New Referral - Set this to No if you want your users to have to progress through the stages rather than selecting one.
  • Set as default Stage when entering Extra Info on a Referral - When using Extra Info, this will default to the selected stage
  • Updates current Referral stage - if you are using stages to indicate tasks, rather than the stage of the referral, set this to No then it will not update the stage of the referral.
  • Referral Only: Referred by This can be used to default to a chosen referrer as that particular template is only used for that referrer.
  • Referral Reasons - will be present if they are activated for that project
  • Contact Method - The method of contact used to complete the action using this stage.
  • Details of Contact - The text entered in the details of contact by this stage.
  • Done By - The user specified to do the recorded action.


If something needs to be done, you can fill in the Action details: outstanding action section

  • User allowed to enter further actions? - You can set this to know, this will stop any further actions being created when using this stage.
  • Further Action Needed - Details of the text used if the stage creates a further step/action.
  • Priority rating - Specifies if a priority rating should be populated for the further action that is required.
  • Response Method - The method to be used for the next step/action.
  • Calculate follow-up date? - You can have the further action to be done by date to be calculated on the date of entry.
  • Date calculation period - Specifies how the follow up date is calculated.
  • No. of days until next action? - Specifies the number of days/working days to calculate.
  • Planned when-by time - Specifies a planned time for the further action.
  • To be done by - Specifies the user to complete the further action.

Please note that the fields above can be left blank for the user to complete when creating referrals/case or updating existing ones.

Click 'Save Details' to save your changes, you will be returned to the previous screen where you can add new stages.

Referral Status

The Referral Status allows you to use multiple stages which can reflect the task, or progress of that referral, yet be collated into a single status.


Editing Stages

Once the stages have been created you can re-order the stages without the need for changing the display order. Simply click on the icon on the left and drag the stage to its required order. Alternatively, you can sort A to Z using the icons at the top of the screen.

New.png


Helpheader small.png