Difference between revisions of "Restricted IP Addresses"

From Charitylog Manual
Jump to: navigation, search
Line 5: Line 5:
 
Click on Enter New IP Address to add to the whitelist (acceptable IP address)
 
Click on Enter New IP Address to add to the whitelist (acceptable IP address)
  
[[File:New_IP.jpg|100px]]
+
[[File:New_IP.jpg|10px]]
  
 
Complete the following;
 
Complete the following;

Revision as of 11:33, 7 May 2020

Restricted IP Addresses are used to Whitelist locations, restricting users to only login from these locations. It is recommended that the user has a dedicated IP address (allocated to the office or home internet connection). Each Security Group can be restricted to a dedicated IP address (whitelisted) that is known to be secure.

File:Restricted IP.jpg

Click on Enter New IP Address to add to the whitelist (acceptable IP address)

10px

Complete the following;

  • Ip Address - This is the dedicated IP (Internet) Address for the location to whitelist.
  • Device Name - This is the name of the device or location, this will be the name seen when adding to the [[Group Access|Security Groups Use *From - Leaving the date blank will keep the device/location active. If you set a from date group assigned this address will only be able to access the system after this date.
  • Use To - Leaving the date blank will keep the device/location active. If you set a to date group assigned this address will only be able to access the system before this date.
  • Active IP Address? - If this device/location is required or not.

Click save to add the IP Address to the whitelist.

To allocate the IP Address see Group Access.