Revision as of 14:08, 11 February 2022 (view source) Alanconway (talk | contribs) m (→‎Introduction) ← Older edit		Revision as of 09:35, 30 June 2022 (view source) Alanconway (talk | contribs) m (→‎Record a Contact tab) Newer edit →
Line 107:		Line 107:
−	{{#ev:youtube|lW7PL2eaVnw|790}}	+	{{#ev:youtube|dkvISvsJWos|790}}

---

Revision as of 09:35, 30 June 2022

Introduction

Projects are for Referrals/Cases and interactions to be grouped together to enable reporting. Generally projects will be similar to the services provided. If an organisation offers an Information and Advice service (including advocacy support) they would possibly consider two projects; Information & Advice and Advocacy. From here the system would be able to report on the two projects together or separately.

Projects are also used with some of the Modules available:

• Handypersons - Doing minor home adaptations
• Roster - Care Provision, Befriending and other roster type service
• Funded Work - Funding applications for major home adaptations, from Technical visit through to completion

Some services in an organisation my have sub services that they offer. Examples below:

• Befriending - This could offer Telephone Befriending and Home Visiting
• Counselling - Group based or individual sessions
• Carer Support Services - Adult Carers, Young Adult Carers and Young Carers
• Advice and Support - Help line and Casework

If there is a requirement to report on the subservices independently it may be considered to use a project for each sub service. Project design is very important and reporting is a major consideration. When reporting on a project this can be then split down into different aspects like gender, ethnic origin etc. If there is a need to analyse demographics and statistics based on the sub services that it would be recommended to use separate projects.

Projects are not just used for working with services users and can be useful in other areas of the organisation. You could have a project for use with:

• Volunteer Recruitment
• Training
• Appraisals
• Administration
• Planning processes like fundraising, event management etc.

Apart from reporting, projects will enable you to use templates and workflows, with reminders for the users. When you open a new case or referral this would then be connected to a project. Any work undertaken will be recorded and reported under the associated project. You can also restrict users to which projects are available. Through this page you will see the available options to projects.

Project Setup

When you navigate to the Project Setup page you will be displayed the current active projects (to view inactive projects click the 'Show All' button) on the system with some summary information:

• Name of the project
• The funder of the project
• Type of project - Will be blank for standard projects. If connected to a Module the module name will be displayed; Funded Work, Handyperson Scheme, IMCA Project or Roster Workers Schedules.
• The number of referral/case based extension databases connected to the project.
• The number of Ladder Outcomes connected to the project.
• The start date of the project.
• The end date of the project.
• If the project is still active - If set to know the project will not be available to reports or Recording Contacts, project history will still be displayed on person/org records history page.

File:Cl PSU 1.png

Creating/Editing Projects

To edit a project click on it's name or to add a new project click the 'Enter New Project' button. You will then be taken to the individual/new project page. If you want to copy the settings of another project select it in the drop down and click copy, on the prompt click cancel or okay.

You will need to enter/edit the details on each tab.

General tab

General details of the project and it's type.

1050px

On this section, complete the following information:

• Project Name - The name of the service/project, this will be displayed to users.
• Description - Only displays on this page for administrators.
• Type of Project - Some Modules require a project to be set; Handypersons, IMCA, Funded Work and Roster. Both Handyperson and Roster also have additional option described below.
• Use Termination and "in project"? - This will enable/disable the option to terminate people from projects if you solely want to use referral closure.
  • Roster Worker Only
    • Create Roster Workers Work Schedule Automatically? - Depending on how the service runs you can have a support plan created when a referral is received. If you are going to record cases/referrals that would be enquires or maybe an assessment needs to be carried out first you can select 'No'. The support plan can be created when the person/organisation has been accepted to receive the service.
    • Send email to co-ordinator email address (if 'Additional Notes' box is filled in on Jobcard entry screen) - When a worker has updated their work there is an option to record job notes that can be sent to the coordinator. It is strongly recommended that you use your own email servers (see Email Settings) and only use a secure email system (Encrypted email to the client application).
    • Co-ordinator email address - Enter the email address where the above notes would be sent to.
  • Handy Persons Only
    • Create Handyperson Job Automatically? - Depending on how the service runs you can have a JP Job Card created when a referral is received. If you are going to record cases/referrals that would be enquires or maybe an assessment needs to be carried out first you can select 'No'. The HP Job Card can be created when the person/organisation has been accepted to receive the service.
• Available for Record a Contact (Anonymous)? - On the system there is a tool to record contacts with anonymous people.
• Help Text Available in Record A Contact Screen - The text entered here will be available to users via a help icon when recording contacts
• Start Date - This is a non reportable field and is for information purposes only, specifies the start date of the service.
• End Date - This is a non reportable field and is for information purposes only, specifies the end date of the service.
• Active? - When set to yes the project is available to be used and reported on. When set to no the project cannot be used to accept new referrals/cases or to be reported on. Any history on a person/org record will be visible for inactive projects.
• Total Time Accumulated So Far: - Displays the accumulation of Staff and Volunteer time recorded against the project.
• Address line 1 - This address is for either information purposes on this page or as an invoice address when using the invoice module.
• Address line 2
• Address line 3
• Address line 4
• Address line 5
• Postcode
• Telephone Number

Record a Contact tab

This tab controls the functionality of the Record A Contact screen, see Contact Management.

1050px

• Default for date and time of contact - Choose if the date and time box is blank, uses the time at the point the contact was created or the time that a previous action (if used) was due to be done.
• Entry Requirement: Referrer details - This allows you to specify if a warning is display if a referrer is not selected or forces a referral to be selected.
• Force entry of time of contact (date is always compulsory) - Specifies if a user must enter a time that the contact was recorded (useful when 'Default for date and time of contact' is set to blank date and time)..
• Allow entry of Contact Types? - In addition to Contact Methods you can use Contact Types to increase report statistics.
• Allow Entry of Conflict of Interest? - Allow entry/force the option to specify if there is a conflict of interest with notes. If this is forced it will be required to input on each contact.
• Allow entry of planned duration of future actions? - This option allows you to specify the time of future contacts/appointment.
• Allow entry of Referral Reasons? - This allows you to specify if a single or multiple reason can/must be selected. Generally this is 'Why have they come to our service?'
• Allow entry of Consent Rule Information? - Allows the entry of referral based Consent Rules to be displayed/forced.
• Allow entry of Required Outcome? - Required Outcome is an additional text box that can be added when creating a new referral/case.

• Automatically Follow-up on External Referrals - This will create an outstanding action for this option.
• If set, default external referral follow-up in days - This specifies the follow-date.
• Automatically Follow-up on Information Links - This will create an outstanding action for this option.
• If set, Default Information Referral Follow-up in Days - This specifies the follow-date.
• Automatically Follow-up on Signposts? - This will create an outstanding action for this option.
• If set, default Signpost follow-up in days - This specifies the follow-date.

• Automatic referral closure - after referral/action completion? - When set to yes a referral will be closed automatically if there are no further/outstanding actions to be completed. Generally if something is to be done before a referral/case is closed an further action would be set (do case review, check client is okay etc). If set to know then the referral needs to be closed manually on the referral/case outcome screen.
• Entry Requirement : Project Subcategory - Decide the entry requirement for the project subcategory option. This appears on the record a contact page for the project, and you can define if this field is mandatory, presents a warning, or can be left empty.
• Time Spent - Time spent can be used to record the amount of time the user spent on that contact. This will appear on the core part of the record a contact screen.
• Allow entry of referral source? - This field appears as 'where did they hear about us?' on the record a contact screen. You can decided if this is displayed, not displayed, or forced. Populate the items in this list via Cog > Projects & Referrals > Referral Sources.
• Staff Travel Time - This will allow you to record the amount of time spent travelling for the contact. This field is displayed on the right hand side of the screen, and you can decide if you'd like this to be forced, displayed, or not displayed.
• Staff Travel Mileage - This will allow you to record the amount of mileage used when travelling for the contact. This field is displayed on the right hand side of the screen, and you can decide if you'd like this to be forced, displayed, or not displayed.
• Staff Transport Method - This field allows you to record the method of transport used by the staff member travelling for the contact. This field is displayed on the right hand side of the screen, and you can decide if you'd like this to be forced, displayed, or not displayed.
• Force Entry of Contact Method - Set this to be forced if it's compulsory for users to capture a contact method.
• Allow use of priority ratings - this creates a priority rating drop down for further actions. Please note, the list of priority ratings is currently not customisable.
• Automatically follow-up on volunteer assignments - This will create an outstanding action for this option.
• If set, default volunteer follow-up in days - This specifies the follow-date.

Field Sets Section

This section specifies which GDPR field set(s) are required for this project to function. If you need Names, addresses etc for the service user then this requires a field set(s) to specify these fields (See Field Sets). When a user logs in the system will look at the projects the user has access to and display the fields required by these projects.

1050px

Simply select all the field sets that are required by this project. Visit Field Sets to edit or create a new one.

Branches Section (Requires Branch Module)

With the Branch Module you will have a 'Branches' section. On this section you are able to select which branches this project is available to. You can also select branch views (groups of branches).

1050px

If a project is set across branches and a user has access to this project and the branches you can set the user record to view referrals/cases from these branches (see Users).

Referral Templates Section

Referral templates are used to define the different stages a referral may progress through. They can automate certain aspects of the referral process. They also aid reporting because it will demonstrate the particular stage a referral is on which is useful for case management.

Code Settings Section

The Code Settings section is used to set which Classification Codes are used by the project and these are either Referral/Case based (displayed on the Record A Contact page) or Outcome Based (displayed on the Referral/Case Outcome page).

1050px

You can click on the File:SelectAll Tick.PNG to select all, to unselect all click on File:DeselectAll cross.PNG. If you wish to select multiple sets of codes you can click on the first set and click the remaining codes whilst holding down the CTRL button on the keyboard. Once you have select codes you can then choose if the codes are forced.

Funding Section

The Funding Section allows you to use Project Funding Streams and specify basic details about who funds the project (service).

1050px

Funding Streams Details

To select the funding streams (if set up) simply click on the streams required, this will add an additional drop down to the Record A Contact screen.

Funder Details

The Funder Details section is only displayed here and is not reportable. You can select up to 5 Funders and specify the funding amount.

Types Of Orgs & People tab

The Types of Orgs and People tab controls which record types are used with this project. You can also link a second record to attach to the referral/case, as well as showing this referral on the linked record (this can be set via Operational Rules)

1050px

The top section of this page allows you to specify which of the record types this project/service is available to (provided to). When you select Record A Contact for the chosen record type this will display this Project.

The bottom section allows you to add an additional person/org to the referral/case, this can be used for different scenarios. You can also restrict the system so the the additional person can only be selected once whilst a referral/case is still open/ongoing.

Examples of use for additional person/org

• Complaints - Someone is making a complaint against an organisation on your system. You can have the history displayed on both the Client (person making the complaint) and the organisation (whom the complaint is against):
  • The top section set to Clients.
  • Bottom Section set to Organisations.
  • The alternative name set to 'Complaint against'.

• Referring Person - This can allow you to record not only the referrer but the referring person. You probably would not have the history display on the referring persons record:
  • The top section set to Clients.
  • Bottom Section set to Professionals.
  • The alternative name set to 'Referring Person'.

• Assigning a support worker - The referral can be received and have multiple people working on the case, but you need to name one dedicated person as the support worker:
  • The top section set to Clients.
  • Bottom Section set to Staff.
  • The alternative name set to 'Support Worker'.

• Disciplinary Meeting for Staff - You may want to use the system for some HR functions like appraisals or a disciplinary.
  • The top section set to Staff.
  • Bottom Section set to Staff.
  • The alternative name set to 'Staff witness'.

• Working with a young person with a parent - Your clients would be named as Child and you would require a record type named to Parents. The parent record could be set to show the history of all children they have.
  • The top section set to Child.
  • Bottom Section set to Parent.
  • The alternative name set to 'Parent or Carer'.

Additional Data Collection Section

This section allows you to configure any Extension Databases (need to be set to this project), Ladder Outcomes and Assessment Forms (deprecated feature).

1050px

Click on the 'Save and Edit Additional Data Collection' button to access the settings for the Extension Databases, Ladders and assessment forms. The page that follows will be broken down into four sections;

Extension Databases

File:ProjSetup extdb.PNG

You will be displayed a list of extension databases that have been set up to be used with this project (see Extension Database Setup).

When to ask for Data Entry

• On the Referral screen or History Section - This will only show on the person/org history page (shows the top three set in the display order) and on the referral edit page (shows all). It will not be displayed when recording any contacts for the project.
• When creating new Referrals only - Will be displayed when creating a new referral/case and not on future contacts/updates. It will also be display on the history section (shows the top three set in the display order) and on the referral edit page (shows all).
• When creating new or re-saving old Referrals only - This is useful if you have setup a new extension database. If a user either creates a new referral or edits an exiting referral the Extension Database will be displayed. It will also be display on the history section (shows the top three set in the display order) and on the referral edit page (shows all).
• When creating Referrals or Actions (For every occurrence) - This will display the extension database when creating a referral, updating an outstanding action, creating a further action or extra info. It will also be display on the history section (shows the top three set in the display order) and on the referral edit page (shows all).

For Quick Diary This is a deprecated feature.

Display Order

The display order shows which order the extension databases will appear (for data entry) and how they are displayed on the history page (shows 3 with the lowest display order) and referral edit page.

Ladder Outcome Groups

File:ProjSetup laddergroups.PNG

This allows you to specify which Ladder Outcome Groups are used with the project and how they are used. You will be displayed a list of all the groups with the following options;

• Used in Project? - Set to yes and the group will be available via the Summary page of the client/org for each referral/case.
• One or many assessments allowed? - Are you recording a one off assessment (often used with a scale) or Multiple (used to measure progress made from start to end).
• Target outcome needed? - Allows you to record a target, useful for multiple outcomes.

Ladder Outcomes (not in groups)

File:ProjSetup ladder.PNG

If you have individual ladders that you wish to use then these can be applied here (in addition to the groups). You will be displayed all ladders setup on the system.

• Used in Project? - Set to yes and the group will be available via the Summary page of the client/org for each referral/case.
• No of Subheadings - Displays how many subheading have been configured for the ladder (if 0 the ladder cannot be used as it is not fully set up).
• One or many assessments allowed? - Are you recording a one off assessment (often used with a scale) or Multiple (used to measure progress made from start to end).
• Target outcome needed? - Allows you to record a target, useful for multiple outcomes.

Assessment Forms

Deprecated feature.

User Access

This section enables bulk editing of restricted users to give access to the project and/or to create referrals in the project.

1050px

You can give access to all users by selecting Tick All at the top of each column. If you wish to only select individual users simply click the appropriate tick box for each user you wish to change.

• Full Access - This will allow the user to view the details of referrals on the Action List and on the records History Tab.
• New Referrals - This allows the user to select the project on the project selector for Record A Contact.

3rd Party Systems tab

Microsoft Office 365

• Is this project using Microsoft Outlook ™? - set to yes for this project to be synchronised. This requires a valid Microsoft Office 365 Outlook licence and mailbox for each user.

File:Projects 3rdpartyoutlook.PNG

For further details please see Microsoft Office 365 Outlook Calendar Integration for further details.

Other Integrations

Select options for links to third party software.

Webinar

---