Quick Start Guide for Administrators

From Charitylog Manual
Revision as of 13:25, 6 July 2018 by Rduheaume (talk | contribs)
Jump to: navigation, search
Helpheader small.png

The system is designed to be customisable for each organisation that uses it. Before you get going you will be provided a pre-implementation spreadsheet to complete, from this a system is created. This guide will talk you through the various steps that are needed to get your system running.

Pre-Implementation Spreadsheet (not used for Members, local and single project system).

The pre-implementation spreadsheet is used to save time on the first day of setting up your system. It contains pages to configure some of the basic dropdowns that you may use. If the dropdowns are not required then the options can be left blank. The lists that are created can be added to at a later date if required. Any thing that is not on the forms will be discussed with you Implementation Consultant on your setup days. Below is an explanation of each page of the spreadsheet.

Introduction

The Introduction sheet give you details on how to complete the forms.

Organisation Details

Enter the details of your organisation. The specified organisation name will be used to name your new system as well as will be used to generate log in details.

Ethnic Groups

Ethnic groups are generally use for reporting outputs. Populate a list based on what your organisation requires across all services.

Age Groups

Age groups or bands are used for calculating a person Date of Birth and as a reporting output. Age Ranges must not have any gaps or cross overs and start at 0, finishing at 999.

Religions

If your organisations requires to support or report on religious groups then enter the name of each group you need.

Sexual Orientation

In addition to the gender field on the system there is the option to record a persons sexual orientation.

Districts/Wards

On the records is the option to place people/organisation into reporting areas. This list is to populate those areas.

Disabilities

This is used for specifying a persons disability/ailment and can be used in reporting. An individual can have multiple.

Marital Status

If required populate with the marital statuses that you use.

Relationships

The system can link records together using relationships. Personal relationships can include relationships with keyworkers like Social Workers etc. When adding a relationship you need to think about the opposite match, example Husband & Wife, Support Worker & Supported Person.




OLD ADMIN GUIDE

  1. Throughout the build of the system, you will be able to control how it goes together, ensuring your organisation's needs are met
  2. You will be able to change and adapt the system in the future for your changing needs
  3. When changes are required, this can be done by your staff, for free - instead of having to pay for software development

Of course having every user of the system able to change the setup would be a very bad idea - chaos would reign! We recommend that if you're a customer organisation, you nominate a few people (usually between 2 and 6) to be your in-house administrators.



I'm an administrator... what do I do?

You'll be setting up the system with help from your Implementation Consultant. Some administrators might oversee the whole system - others might just have ownership of the part of the organisation they work in. Often, service managers administrate their own services, which means they can make sure that the data they need for reporting/performance monitoring is captured.

Then, once your system is up and running, the Administrators - you - will be left in charge. Of course we're not trying to pass all the responsibility of running the system onto you - there is support available:

  • Help bubbles within the system tell you what certain features do
  • Every page in Charitylog has a linked section in this manual
  • The technical support line


File:Qsadmin chart1.png


As you can see, part of the administration team's ongoing work is to help the end users with the system. When you first implement Charitylog, there will probably be a few questions, but over time the end users will become familiar with the system and are likely to be able to find the help content they need in the manual.

Internal Support Users

Optionally, anybody can be set as an Internal Support User. There is a drop-down field on the user record for each person to say whether they are an Internal Support User or not:


File:Qsadmin 1.png


If set to "Yes", this person will appear on a help screen if a user fails to log in properly. They will be shown a screen like this:


File:Qsadmin 2.png


Note that they are shown the email address and phone number listed in the user's record, so although the system may tell you that such an entry is invalid, it can be useful to enter an internal extension (as shown) so that the user knows who to call if they need help logging in.


File:Qsadmin 3.png

Setting up and running the system

You might see the system during the sales/tender process, or you might not have seen it until implementation day 1. Either is fine! The aim of this first day is for you to get a good grasp of the Charitylog system, so that you can think about the ways that it will work for you. Day 1 also provides an opportunity for your Charitylog Implementation Consultant to get to know your organisation well.


Day 1

On day 1 you will be shown the basic system, and taught how to:

  • Log in
  • Search for clients (and other types of Organisations or People) and create new ones
  • Record contacts with them
  • View the history of contacts that has happened with them
  • See your outstanding work on the Action List

Depending on your organisation, and the pace of the day, you may well cover more material too.


After day 1

After day 1 your Implementation Consultant will leave you with some tasks to complete before the next day of implementation. These are likely to include setting up some Projects, and amending Drop-Down Lists.

What follows day 1 will depend on the needs of your organisation, and will be decided by your Implementation Consultant.


Helping users log in to test databases

As well as your live system, your organisation will have access to at least one "test" database - a replica of your live system for training and experimenting. This can be updated to mirror the current state of your live system at any time - click here for details: Update Replica Databases.

Users may need help logging into these systems, as the first pair of usernames and passwords are different to the ones that they usually use.

Once logged, page backgrounds will have the word "TEST" displayed to alert users as to which database they are logged into.

File:Qsadmin 4.png

If you are using an Alpha or Beta version of the system, this will also be displayed on the background.

File:Qsadmin 5.png



Rob Kay - manual author (talk) 09:13, 19 January 2016 (GMT)