Difference between revisions of "Project Set Up"

From Charitylog Manual
Jump to: navigation, search
(Branches tab)
(Branches tab (Requires Branch Module))
Line 143: Line 143:
  
 
===Branches tab (Requires [[Modules| Branch Module]])===
 
===Branches tab (Requires [[Modules| Branch Module]])===
 +
 +
 +
With the Branch Module you will have a 'Branches' tab.  On the tab you are able to select which branches this project is available to.  You can also select branch view (groups of branches).
  
 
[[File:Proj_Branches.PNG]]
 
[[File:Proj_Branches.PNG]]

Revision as of 08:12, 25 April 2018

Helpheader small.png

Currently under construction 19/04/2018


Introduction

Projects are for Referrals/Cases and interactions to be grouped together to enable reporting. Generally projects will be similar to the services provided. If an organisation offers an Information and Advice service (including advocacy support) they would possibly consider two projects; Information & Advice and Advocacy. From here the system would be able to report on the two projects together or separately.


Projects are also used with some of the Modules available:

  • Handypersons - Doing minor home adaptations
  • Roster - Care Provision, Befriending and other roster type service
  • Funded Work - Funding applications for major home adaptations, from Technical visit through to completion


Some services in an organisation my have sub services that they offer. Examples below:

  • Befriending - This could offer Telephone Befriending and Home Visiting
  • Counselling - Group based or individual sessions
  • Carer Support Services - Adult Carers, Young Adult Carers and Young Carers
  • Advice and Support - Help line and Casework

If there is a requirement to report on the subservices independently it may be considered to use a project for each sub service. Project design is very important and reporting is a major consideration. When reporting on a project this can be then split down into different aspects like gender, ethnic origin etc. If there is a need to analyse demographics and statistics based on the sub services that it would be recommended to use separate projects.


Projects are not just used for working with services users and can be useful in other areas of the organisation. You could have a project for use with:

  • Volunteer Recruitment
  • Training
  • Appraisals
  • Administration
  • Planning processes like fundraising, event management etc.

Apart from reporting, projects will enable you to use templates and workflows, with reminders for the users. When you open a new case or referral this would then be connected to a project. Any work undertaken will be recorded and reported under the associated project. You can also restrict users to which projects are available. Through this page you will see the available options to projects.

Project Setup

Menu Projectsetup.PNG


When you navigate to the Project Setup page you will be displayed the current active projects (to view inactive projects click the 'Show All' button) on the system with some summary information:

  • Name of the project
  • The funder of the project
  • Type of project - Will be blank for standard projects. If connected to a Module the module name will be displayed; Funded Work, Handyperson Scheme, IMCA Project or Roster Workers Schedules.
  • The number of referral/case based extension databases connected to the project.
  • The number of Ladder Outcomes connected to the project.
  • The start date of the project.
  • The end date of the project.
  • If the project is still active - If set to know the project will not be available to reports or Recording Contacts, project history will still be displayed on person/org records history page.


600px


Creating/Editing Projects

To edit a project click on it's name or to add a new project click the 'Enter New Project' button. You will then be taken to the individual/new project page. If you want to copy the settings of another project select it in the drop down and click copy, on the prompt click cancel or okay.

Projects copy.PNG


You will need to enter/edit the details on each tab.

General tab

General details of the project and it's type.

File:Cl PD 1.png

On this tab complete the following information:

  • Project Name - The name of the service/project, this will be displayed to users.
  • Description - Only displays on this page for administrators.
  • Type of Project - Some Modules require a project to be set; Handypersons, IMCA, Funded Work and Roster. Both Handyperson and Roster also have additional option described below.
    • Roster Worker Only
      • Create Roster Workers Work Schedule Automatically? - Depending on how the service runs you can have a support plan created when a referral is received. If you are going to record cases/referrals that would be enquires or maybe an assessment needs to be carried out first you can select 'No'. The support plan can be created when the person/organisation has been accepted to receive the service.
      • Send email to co-ordinator email address (if 'Additional Notes' box is filled in on Jobcard entry screen) - When a worker has updated their work there is an option to record job notes that can be sent to the coordinator. It is strongly recommended that you use your own email servers (see Email Settings) and only use a secure email system (Encrypted email to the client application).
      • Co-ordinator email address - Enter the email address where the above notes would be sent to.
    • Handy Persons Only
      • Create Handyperson Job Automatically? - Depending on how the service runs you can have a JP Job Card created when a referral is received. If you are going to record cases/referrals that would be enquires or maybe an assessment needs to be carried out first you can select 'No'. The HP Job Card can be created when the person/organisation has been accepted to receive the service.
  • Available for Record a Contact (Anonymous)? - On the system there is a tool to record contacts with anonymous people.
  • Help Text Available in Record A Contact Screen - The text entered here will be available to users via a help icon when recording contacts
  • Start Date - This is a non reportable field and is for information purposes only, specifies the start date of the service.
  • End Date - This is a non reportable field and is for information purposes only, specifies the end date of the service.
  • Active? - When set to yes the project is available to be used and reported on. When set to no the project cannot be used to accept new referrals/cases or to be reported on. Any history on a person/org record will be visible for inactive projects.
  • Total Time Accumulated So Far: - Displays the accumulation of Staff and Volunteer time recorded against the project.
  • Address line 1 - This address is for either information purposes on this page or as an invoice address when using the invoice module.
  • Address line 2
  • Address line 3
  • Address line 4
  • Address line 5
  • Postcode
  • Telephone Number

Record a Contact tab

This tab controls the functionality of the Record A Contact screen, see Contact Management.

File:Cl PD 2.png


  • Force use of referral templates? - If you have set up templates on the project you can set this to yes, it will remove the option to create a referral/case without using a template.
  • Automatic referral closure - after referral/action completion? - When set to yes a referral will be closed automatically if there are no further/outstanding actions to be completed. Generally if something is to be done before a referral/case is closed an further action would be set (do case review, check client is okay etc). If set to know then the referral needs to be closed manually on the referral/case outcome screen.
  • Entry Requirement: Referrer details - This allows you to specify if a warning is display if a referrer is not selected or forces a referral to be selected.
  • Entry Requirements: Project subcategory - If you wish to use Project Subcategories you can choose if they are forced (the user must select a subcategory).


  • Default for date and time of contact - Choose if the date and time box is blank, uses the time at the point the contact was created or the time that a previous action (if used) was due to be done.
  • Force entry of time of contact (date is always compulsory) - Specifies if a user must enter a time that the contact was recorded (useful when 'Default for date and time of contact' is set to blank date and time).
  • Allow entry of Staff work time and travel information - This will display the option to record staff time and travel in the Record A Contact screen.
  • Force entry of Staff work time? - When displayed allows you to force the option.
  • Force entry of Staff travel time? - When displayed allows you to force the option.
  • Force entry of Staff travel mileage? - When displayed allows you to force the option.
  • Force entry of Staff travel method? - When displayed allows you to force the option.
  • Force entry of Contact Method? - This is the method of contact for recording something done.
  • Allow entry of Required Outcome? - Required Outcome is an additional text box that can be added when creating a new referral/case.
  • Allow entry of Contact Types? - In addition to Contact Methods you can use Contact Types to increase report statistics.
  • Allow entry of Referral Source? - Allows you to display/force the entry of 'How did you here about us'.
  • Allow Entry of Conflict of Interest? - Allow entry/force the option to specify if there is a conflict of interest with notes. If this is forced it will be required to input on each contact.
  • Allow entry of planned duration of future actions? - This option allows you to specify the time of future contacts/appointment.
  • Allow entry of Referral Reasons? - This allows you to specify if a single or multiple reason can/must be selected. Generally this is 'Why have they come to our service?'
  • Allow entry of Consent Rule Information? - Allows the entry of referral based Consent Rules to be displayed/forced.
  • Automatically Follow-up on External Referrals - This will create an outstanding action for this option.
  • If set, default external referral follow-up in days - This specifies the follow-date.
  • Automatically Follow-up on Information Links - This will create an outstanding action for this option.
  • If set, Default Information Referral Follow-up in Days - This specifies the follow-date.
  • Automatically Follow-up on Signposts? - This will create an outstanding action for this option.
  • If set, default Signpost follow-up in days - This specifies the follow-date.
  • Automatically follow-up on volunteer assignments - This will create an outstanding action for this option.
  • If set, default volunteer follow-up in days - This specifies the follow-date.


Field Sets tab

This tab specifies which GDPR field set(s) are required for this project to function. If you need Names, addresses etc for the service user then this requires a field set(s) to specify these fields (See Field Sets). When a user logs in the system will look at the projects the user has access to and display the fields required by these projects.

File:Proj FeildSets.PNG

Simply select all the field sets that are required by this project. Visit Field Sets to edit or create a new one.

Branches tab (Requires Branch Module)

With the Branch Module you will have a 'Branches' tab. On the tab you are able to select which branches this project is available to. You can also select branch view (groups of branches).

File:Proj Branches.PNG

Code Settings tab

File:Cl PD 3.png


Choose whether to use Classification Codes in this project, and whether to force users to enter them. See the Project Details - Code Settings tab page for full details.

Funding tab

500px


Record who funds this project, and the related amount(s). See the Project Details - Funding tab page for full details.


Types Of Orgs & People tab

500px


Choose which Organisation and People types this project works with. See the Project Details - Types Of Orgs & People tab for full details.


Additional Data Collection tab

500px


Select which Assessment Forms, Extension Databases and Ladder Outcomes to link to this project. See the Project Details - Additional Data Collection tab page for full details.


3rd Party Systems tab

Select options for links to third party software. See the Project Details - 3rd Party Systems tab for full details.


Helpheader small.png